Technical data:

Dimensions:Length and breadth: 20cm (meanderings <0,5mm)

Size:1,6cm (meanderings <3mm)

Weight:1,3kg a piece

Maximum angular deviation:<2°

Size of breakage:Minimum 1200N

Wear measuring quantity:As marble or better (grade II/III)

Friction coefficient B202: R9

MiraColour tiles are also suitable for underfloor heating, if the floor is heated constantly and with a normal water temperature (22-28°Celsius). The lines have to be installed close meshed and at least 5 cm below the tiles.Large variations in temperature have to be avoided, otherwise the tiles could crack open.

Recommendations for use

These recommendations of treatment are given after the best knowledge, however,can never be occasion for every adhesion. Read through the recommenfation carefully please.

Miracolour tiles are no ceramic tiles, but handmade authentic tiles from cement. The resultis a product which is porous in certain masses. Colour differences, form differences, smalldamages on corners and edges: all that is to the product, the material kind and the production process to be assigned and gives the ground the typical liveliness.

MiraColour tiles can be applied within the house in every area. However, the tiles are not frostressting.

Miracolour tiles are fitted flush preferably with fast-drying, water resistant flexible adhesive on afinished, entirely dry cement stone floor and with water resistant joints means.

The remaining joints means remove only with clear water. Never use acidic meansaround superfluous joints means, otherwise you damage the tile irreparably.